Off The House

For use with any flag 3x5' flag or smaller. A flag that is 3x5' in size would be proportional to this flagpole. The top section of the pole rotates...

This 2 position flag pole bracket is made to fit standard decorative house flag poles with 1" diameter. This metal pole bracket has a white powder...

These 1" flag mounting rings are designed for flags that have grommets. The rings have a rotating anti-wrap feature which allows the flag to turn i...

Includes screws Fully adjustable to suit any angle needed with a 1" diameter for 1" poles Has an area for fitting a zip ties or hose clamps through...

Allows pole to hang at a 45 or 90 degree angle. For use with a 1" pole. Use with small flagpoles that accept a 1 inch outside diameter (not include...

For use with any flag smaller than a 3x5' flag. A flag that is 3x5' in size would be too large proportionally for this flagpole. The top section of...

(This bracket does not include screws) 1" diameter to be used with 1" flagpoles. Has an area for fitting a zip tie or hose clamp through without th...

This 2 position flag pole bracket is made to fit standard decorative house flag poles with 1" diameter. This metal pole bracket has a black powder ...

An antique copper finish flag bracket that can be mounted outdoors to hold a house flag poles in 2 different positions: 45 degree angle or 90 degre...

Allows pole to hang at a 45 degree angle. For use with a 1" pole. Screws not included.

CAUTION: The wings of the eagle tend to be sharp, even though they are rounded and this eagle is made of a styrene plastic. The end of your flag ca...

This 2-position Aluminum bracket is designed to be used with 1-1/4" flag poles. Made in USA. Use with small flagpoles that accept a 1-1/4" inch out...

These flag mounting rings are designed to be used for flag grommet attachment. There is one ring per pack. Designed to fit a 1 1/4" pole only.

A miniature version of our Solar Flagpole Light, designed to work with small outdoor flagpoles. It ships with a collection of three angle-adjustabl...

This white painted aluminum 2-piece pole includes 2 flag rings (for flying a grommeted flag), a snap and swivel ring (for flying flags with a pole ...

Adjustable, convenient mounting options; solar panel, light head and bracket tree are all fully adjustable, allowing for convenient mounting. Light...

Gleaming metallic gold ball replacement ornament for spinning flagpoles. Designed for a 1" flagpole with a threaded opening to accommodate screw ...

replacement 37"x1.25" beige rotating tube for wooden pole

Allows pole to hang at a 45 degree angle. For use with a 1" pole.

Easily install your 1" flagpole without mounting it to your house with our 1" Galvanized Steel Lawn Socket. Just insert your 1" diameter pole into ...

Pricing shown per ring, flagpole not included. Made for off the house poles that are either 3/4", 1", or 1 3/8". Stationary rings made for spinning...

 Advanced Threadform Technology intertwines a large "chiseled" main thread with a small diameter thread to reduce head snapping and provide: 30% lo...

4-inch #10 bugle head, #2 phillips drive PG+10 grey, coarse thread, sharp point